Profiles Dialog

Setting	Description
Add Profile	Press the folder icon to create a new Profile. When the edit box appears in the list, accept the default profile name or enter a new profile name then hit the Enter key.
Delete Profile	Delete an alignment by highlighting the profile name in the list and press the Delete (X) button.
Add VPI	Press this button to Insert Vertical Point of intersection (VPI) to the bridge profile after the currently highlighted VPI in the grid. The new VPI will be inserted into the grid and added to the graphic view.
Insert VPI	Press this button to Insert Vertical Point of intersection (VPI) to the bridge profile before the currently highlighted VPI in the grid. The new VPI will be inserted into the grid and added to the graphic view.
Delete VPI	Use this button to remove the last VPI in the grid.
Drawing scale	Enter the scale of the bridge profile and press the Apply button.
Station	Enter the station at the VPI.
Elevation	Enter the elevation at the VPI.
Transition	If the elevations between the VPI points are the same, select None. Otherwise, choose either parabola or unequal.
Save DGN	The following button will save the Profile(s) 2D model directly and accurately to Microstation DGN file format, including layers. Save the DGN file in the desired location and once the export is successful you can browse to file location and open/view in Microstation.
LVC-1	Enter the length of the vertical curve preceding the VPI. If the transition type is Parabola this is the entire vertical curve length. If the transition type is Unequal this is the length of the curve preceding the VPI.
LVC-2	Enter the length of the vertical curve following the VPI. This field is only active if the transition type is Unequal.
OK	Press this button to accept the definition and exit the dialog.
Cancel	Press this button to exit the dialog without saving changes.

Add Profile

Press the folder icon to create a new Profile. When the edit box appears in the list, accept the default profile name or enter a new profile name then hit the Enter key.

Delete Profile

Delete an alignment by highlighting the profile name in the list and press the Delete (X) button.

Add VPI

Press this button to Insert Vertical Point of intersection (VPI) to the bridge profile after the currently highlighted VPI in the grid. The new VPI will be inserted into the grid and added to the graphic view.

Insert VPI

Press this button to Insert Vertical Point of intersection (VPI) to the bridge profile before the currently highlighted VPI in the grid. The new VPI will be inserted into the grid and added to the graphic view.

Delete VPI

Use this button to remove the last VPI in the grid.

Drawing scale

Enter the scale of the bridge profile and press the Apply button.

Station

Enter the station at the VPI.

Elevation

Enter the elevation at the VPI.

Transition

If the elevations between the VPI points are the same, select None. Otherwise, choose either parabola or unequal.

Save DGN

The following button will save the Profile(s) 2D model directly and accurately to Microstation DGN file format, including layers. Save the DGN file in the desired location and once the export is successful you can browse to file location and open/view in Microstation.

LVC-1

Enter the length of the vertical curve preceding the VPI. If the transition type is Parabola this is the entire vertical curve length. If the transition type is Unequal this is the length of the curve preceding the VPI.

LVC-2

Enter the length of the vertical curve following the VPI. This field is only active if the transition type is Unequal.

OK

Press this button to accept the definition and exit the dialog.

Cancel

Press this button to exit the dialog without saving changes.